Kaier Falcon screws and nuts  

 

Marc.platvoet
(@marc-platvoet)
New Member Customer
Joined: 11 months ago
Posts: 1
05/03/2019 1:25 pm  

I would like to get some direction on what tools to use to get the screws in place.
Like on the tail there is almost no room to get with a screwdriver to the hole where the screw goes in.
On the wings I have seen similar things.
I love the design, but I do see some issues with the screws.
and could you send a link with what screws and nuts where intended to use.


Quote
admin
(@admin)
Member Admin
Joined: 2 years ago
Posts: 1
05/03/2019 2:39 pm  

Hi Marc, please tell me exactly which positions on the tail and wing (better by image). I will make detail instruction for you.

About the screw type, you should use M2 × 8mm (2mm diameter and 8mm long) from any store.

For example https://www.ficonet-shop.de/epages/15245052.mobile/en_GB/?ObjectPath=/Shops/15245052/Products/X-SCR2X8M&Locale=en_GB

Regards.

This post was modified 11 months ago 3 times by admin

ReplyQuote
Share:

Please Login or Register